GD-TI-AP4503T
Thermal & Optical IP-Camera 3.6 mm
- Reduction of unwanted alarms (false alarms) by classifying target objects using deep learning algorithms. This significantly reduces false alarms generated by objects other than people or vehicles. This makes finding events easier and saves hard drive capacity
- Dual Streaming with 1 infrared channel and 1 optical channel
- Audio Communication & Alarm Input / Output
- 0 Lux: Integrated LED IR Illuminator viewable distance up to 30m
- Picture in Picture - Partial image of infrared channel on the full image of optical channel
- White light flash and audible alarm deterrent function
Specifications
-
Thermal module
- Thermal Sensor Vanadium Oxide Uncooled Focal Plane Array
- Resolution (Thermal) 256 x 192
- IFOV 3.33 mrad
- NETD < 40 mk (@25° C, F=1.0)
- Response Waveband 8 μm to 14 μm
- Detector Pitch 12 μm
- Focal Length (IR) 3.6 mm
- Viewing Angle (IR) 50° x 37.2° (HxV)
- MOD (Min. Object Distance) 0.5 m
-
Camera
- Image Sensor 1/2.7” progressive Scan CMOS
- Video Resolution 2688 × 1520
- Sensitivity Colour 0.0089Lux @ F1.6 (AGC ON)
- Shutter Speed 1 ~ 1/100,000 s
-
Lens
- Lens Focal Length 4.3 mm
- Iris F-Number F1.6
- Field of View 84° ~ 44,8° (H x V)
-
Illuminator
- Max. IR Distance Up to 30 m
- White Light Distance Up to 30 m
- White LED Alarm/ Off
-
Video
- Wide Dynamic Range 120 dB
- Day/Night Switch Color, BW, Auto
-
Audio
- Audio Compression G722.1/G711ulaw/G711alaw/G726/MP2L2/PCM
-
General
- Measurement option Support 3 temperature measurement rule types, 21 rules (10 points, 10 regions and 1 line)
- Object Temperature Range - 20°C to 150°C
- Accuracy ± 8°C
- DRI Range Detection Range, Vehicles 1.4 m x 4.0 m: 460 m Detection Range, Humans 1.8 m x 0.5 m: 150 m Recognition Range, Vehilces 1.4 m x 4.0 m: 112 m Recognition Range, Humans 1.8 m x 0.5 m: 38 m Identification Range, Vehicles 1.4 m x 4.0 m: 56 m Identification Range, Humans 1.8 m x 0.5 m: 19 m
- Smart Function Range VCA Range, Vehicles 1.4 m x 4.0 m: 76 m VCA Range, Hu mans 1.8 m x 0.5 m: 29 m Temperature Measurement, Object 1 x 1 m: 58 m Temperature Measurement, Object 0.2 x 0.2 m: 12 m
- Accessories included Junction box
-
Frame Rate
- Main Stream Thermal: 25 fps (1280 × 720, 704 × 576, 640 × 512, 320 × 240) Optical: 50 Hz: 25 fps (2688 × 1520, 1920 × 1080, 1280 × 720) 60 Hz: 30 fps (2688 × 1520, 1920 × 1080, 1280 × 720)
- Sub- Stream Thermal: 25 fps (704 × 576, 640 × 512, 320 × 240) Optical: 50 Hz: 25 fps (704 × 576, 352 × 288) 60 Hz: 30 fps (704 × 480, 352 × 240)
-
Network
- Users 3 Levels: Administrator, Operator and User
- Number of Clients Up to 20 simultaneously
- Video Compression H.264, H.265, MJPEG
- SD Memory Micro SD/SDHC/SDXC card slot with ANR (up to 256G), NAS (Support NFS, SMB/CIFS)
- Client software C-WERK Viewer, SCMS, IOS App, Android App (SCMS)
- Web Browser Plug-in required live view: Internet Explorer 11 Non Plug-in live view and service: Chrome 57.0+, Mozilla Firefox 52+
- Network Protocol TCP/IP, IPv4/IPv6, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, UDP, PPPoE, SNMP
- Cyber Security 3 levels of user management: admin, operator, user, AES Encryption for Password Protection, Complicated Password, HTTPS (SSL) Login Authentication, Basic and digest authentication for HTTP/HTTPS, 802.1X authentication (EAP-TLS), 802.1X authentication (EAP-MD5), Watermark, IP Adress Filter, WSSE and digest authentication for ONVIF, RTP/RTSP over HTTPS, Control timeout settings, Security audit log, SNMP V2 , SNMP V3, TLS 1.1, TLS 1.2, TLS 1.2 with updated cipher suites including AES 256 encryption. Brute Force Delay Protection, Signed Firmware, Secure Boot by software check
-
I/O Interface
- Video Outputs 1x CVBS (1 Vcc) BNC
- Audio Input/Output 1-ch audio input and 1-ch audio output
- Alarm Input/Output 2, 2
- Network Interface 1x 10, 100 Base T, TX PoE+ (RJ-45)
- Serial Interface(s) 1x RS-485
-
Intelligent Functions
- Intelligent Video Analytics PID, LCD, A-IN, A-OUT, PD & VD, Smoke
- Intrusion Detection Enter and loiter in a pre-defined virtual region
- Line Crossing Cross a pre-defined virtual line
- Region Entrance Enter a pre-defined virtual region from the outside place
- Region Exiting Exit from a pre-defined virtual region
- Event Source Video tampering, network disconnected, IP address conflicted, HDD full, HDD error, illegal login, motion detection
- Event Action Recording: Pre-event, post-event memory card and/or network storage. Picture upload: FTP, HTTP and NAS. Trigger E-mail notification: HTTP, ISAPI. Audio alarm, white light alarm, alarm output and notification to C-WERK VMS. Events are depending on schedule settings.
- Sound Alarm 2 types of audible alarm (VCA and Temperature) 2 preset voice alerts (one for each) 6 importable user-defined voice alerts (6 options shared in the two types)
- Visual Alarm White light alarm with adjustable flashing frequencies
-
Approvals
- Protection Rating IP67 (IEC 60529-2013)
- Standard ONVIF (Profile S, Profile G), SDK/API
-
Environmental
- Operating Temperature -40 °C ~ 65 °C (-40 °F ~ 149 °F)
- Humidity Less than 95%, non condensing
-
Electrical
- Surge Protection TVS 4000V Lightning Protection, Surge Protection and Voltage Transient Protection
- Supply Voltage 12 VDC, 24 VAC, PoE (IEEE 802.3af)
- Power Consumption Max. 8.2 W
-
Mechanical
- Dimensions 321 × 106 × 107 (12.65 × 4.18 × 4.21 inch)
- Weight 1550 g (3.41 lb)
-
Packaging
- Package Dimensions 395 x 195 x 158 mm (15.6 x 7.7 x 6.2 inch)
- Package Weight 1900 g (4.2 lbs)
Downloads
-
Data sheets
DSH-GD-TI-AP4503T-V1-EN
DSH-GD-TI-AP4503T-V1-DE
DSH-GD-TI-AP4503T-V1-RU
DSH-GD-TI-AP4503T-V1-TR
DSH-GD-TI-AP4503T-V1-FR
DSH-GD-TI-AP4503T-V1-IT
DSH-GD-TI-AP4503T-V1-ES
DSH-GD-TI-AP4503T-V1-CZ
DSH-GD-TI-AP4503T-V1-PL
DSH-GD-TI-AP4503T-V1-PT
-
Certifications
CE-GD-TI-AP4503T-2024-08-21 V1.1-EN
-
Quick Start Guide
QG-GD-TI-Series-2025-01-06-V6
-
User Guide
UG-GD-TI-AP1614V-2024-09-04-V6-EN
